News from KICKER Performance Audio
FOR IMMEDIATE RELEASE
February 18, 2019
KICKER® Announces Full 2019 CX-Series Amplifier Line Now Shipping to Dealers
STILLWATER, USA – KICKER® authorized dealers across the country are already receiving the full 2019 KICKER CX-Series Amplifier line, now shipping. Designed with more power and greater installation flexibility, the new group of six CX-Series Amplifiers offers increased value and “installer-friendliness” to both installers and consumers. The amps, which come with hardware for space-saving vertical mounting, are now available for purchase at Authorized KICKER Dealers in-store and online.
Adding an 800- and 400-watt option to the CXA mono amp mix, all four bass amps are now one-ohm stable to increase system wiring flexibility. The amplifiers will also include a full-range, RCA pass-through for easy system expansion, as well as KickEQ™ 6dB variable bass boost, 12dB crossover and a 24dB subsonic filter. The amp is also compatible with the CXARC Remote Bass Control to allow fingertip operation from the front of the vehicle while driving.
Increasing the power to both multi-channel amplifiers, each speaker output is stable down to two ohms, and includes a 12dB crossover. Like the mono models, the bass channel on the unique CXA660.5 includes a 24dB subsonic filter and is compatible with the CXARC remote.
Using FIT+™ (Fail-safe Integration Technology-PLUS), KICKER ensures every 2019 CXA amplifier delivers a flexible, noise-free signal. Featuring a best-in-class input sensitivity, KICKER CX-Series Amplifiers now accept input voltages ranging from as little as 250 millivolts to as much as 40 volts, ensuring the amplifiers will work with virtually any factory or aftermarket radio without the additional expense of a line-out converter. A three-second turn-on/turn-off delay is also standard.
Consumers can visit www.kicker.com/2019-CX-amplifiers for more information.
KICKER Performance Audio products, a division of Stillwater Designs and Audio, Inc.®, are available for the mobile and home audio aftermarket at authorized retailers worldwide, and also as Original Equipment for automobile manufacturers. Consumers seeking more information on KICKER or Livin’ Loud® may call the Consumer Information Line at 1-800-256-5425 or visit the brand website at www.kicker.com. Consumers can follow KICKER socially at Facebook.com/kickeraudio, Twitter.com/kickeraudio, Instagram.com/kickeraudio, or Pinterest.com/kickeraudio, and use the hashtags #kickeraudio and #livinloud.
KICKER CXA.1 Mono Amplifiers Specifications
| Models (at 14.4V) | CXA1800.1 | CXA1200.1 | CXA800.1 | CXA400.1 |
| Class D Power (watts/ch), 1 Ohm mono | 1800 x 1 +/-10% | 1200 x 1 +/-10% | 800 x 1 | 400 x 1 |
| Class D Power (watts/ch), 2 Ohm mono | 1800 x 1 | 1200 x 1 | 600 x 1 | 300 x 1 |
| Class D Power (watts/ch), 4 Ohm mono | 900 x 1 | 600 x 1 | 300 x 1 | 150 x 1 |
| Length (in./cm) | 14-3/8, 36.4 | 12, 30.6 | 8-1/8, 20.6 | 8-1/8, 20.6 |
| Width (in./cm) | 6-3/4, 17 | 6-3/4, 17 | 6-3/4, 17 | 6-3/4, 17 |
| Height (in./cm) | 2-3/8, 5.9 | 2-3/8, 5.9 | 2-3/8, 5.9 | 2-3/8, 5.9 |
Common to All Models
Frequency Response: 25-200Hz
Signal to Noise Ratio: >95dB
Input Sensitivity: High Level 1V-40V, Low Level 250mV-10V
Crossover: Low-pass (variable) 50-200Hz @12dB/octave
Subsonic Filter: 24dB/octave, High-Pass fixed @ 25Hz
KickEQ™ Bass Boost (end panel): Variable 0-6dB, centered @ 40Hz
CXARC Remote Control available on all models
KICKER CX-Series Multi-Channel Amplifiers Specifications
| Models (at 14.4V) | CXA660.5 4-Ch. with Sub Ch. | CXA360.4 4-Channel |
| Class D Power (watts/ch) 2 Ohm stereo | 90×4 | 90×4 |
| Class D Power (watts/ch) 4 Ohm stereo | 65×4 | 65×4 |
| Class D Power (watts/ch) 4 Ohm bridged mono | 180×2 | 180×2 |
| Class D Power (watts/ch) 2 Ohm mono channel | 300×1 | NA |
| Class D Power (watts/ch) 4 Ohm mono channel | 150×1 | NA |
| Sub Channel Crossover | Low (Variable) 50-200Hz @12dB/octave | NA |
| Active Crossover Type | Amp 1-2: High-pass | Hi/Lo/Off |
| Active Crossover Response | Variable 10-200Hz @12dB/octave | Variable 50-200Hz @ 12dB/octave |
| Signal-to-Noise Ratio | >90dB | >95dB |
| Length (in./cm) | 14-1/8, 35.7 | 12-1/2, 31.7 |
| Width (in./cm) | 6-3/4, 17 | 6-3/4, 17 |
| Height (in./cm) | 2-3/8, 5.9 | 2-3/8, 5.9 |
Common to Both Models
Frequency Response: full range 10-20kHz (CXA.5 sub ch. 25-200Hz), +0/-1dB
Input Sensitivity: High Level 1V-40V, Low Level 250mV-10V
Subsonic Filter: 24db/octave, High-Pass fixed @ 25Hz (CXA.5 sub channel only)
KickEQ™ Bass Boost (end panel): Variable 0-6dB, centered @ 40Hz (CXA.5 sub channel only)
CXARC Remote Control capable
For more information:
Ron Burnett (rburnett@kicker.com)
Bill Braun (bbraun@kicker.com)
Roger Demaree (rdemaree@kicker.com)
800 256-0808
P.O. Box 459
Stillwater, OK 74076
